Shingle to Metal · Austin, TX

Shingle to Metal Roof Conversion in Austin

Tired of replacing shingles after every hailstorm and Texas summer? Converting to metal means tearing the shingles off to the deck, fixing what's underneath, and rebuilding every flashing detail in metal. Done right, it's the last roof many Austin homeowners ever buy.

● Metal roofing in Austin since 2002● Standing seam, Galvalume & stone-coated steel● 2204 W Anderson Ln

Why Austin Homeowners Convert From Shingles to Metal

Hail

Central Texas gets hail almost every spring. Metal resists it better than standard shingles, and many metal and stone-coated steel products carry Class 4 impact ratings.

Heat

Reflective metal finishes bounce back more of the Texas sun than dark shingles, which helps keep attic temperatures down.

Lifespan

A well-installed metal roof lasts far longer than an asphalt shingle roof. See how long metal roofs last in Texas.

Wind

Standing seam panels on concealed clips, installed to the panel maker's specs, hold up well in the straight-line winds that come with Austin storms.

Still weighing it? Our comparison of metal roof vs. shingles covers cost, lifespan and performance side by side, and our metal roof cost guide explains what drives the price.

Our Shingle to Metal Conversion Process

  1. Measure and scope

    We measure the roof and write a scope that lists the panel system, gauge, finish, underlayment, tear-off, decking, trim and flashing, so you can compare quotes line by line.

  2. HOA and permits

    Get your HOA's approval of the panel profile and color before panels are ordered, and confirm permit requirements for your address. Our guide to Austin metal roof permits covers the basics.

  3. Tear off to the deck

    All shingles and old underlayment come off. That's the only way to see the condition of the decking that will carry the new roof.

  4. Repair the deck

    Soft, rotted or delaminated sheathing is replaced, and loose decking is re-fastened, so the panels go down on a solid surface.

  5. High-temperature underlayment

    Metal roofs run hot in Texas sun, so the underlayment needs to be rated for it. We install high-temperature underlayment across the deck.

  6. Rebuild every flashing in metal

    Shingle roofs rely on step flashing and sealant. Metal roofs need flashing formed for the panel system at every wall, chimney, valley, skylight and penetration, so every flashing detail is rebuilt.

  7. Correct the ventilation

    Converting is the time to fix attic ventilation, matching intake at the eaves with exhaust at the ridge so the attic doesn't trap heat and moisture.

  8. Install panels and trim

    Panels, clips or fasteners and trim go on to the panel maker's specifications, finished with ridge caps and closures.

Can You Put Metal Over Shingles?

Some contractors install metal panels directly over existing shingles to save on tear-off. It can be done in some situations, but we tear off to the deck on our conversions. Leaving shingles in place hides the condition of the decking, adds a layer that can trap moisture, and makes it impossible to fix flashing and ventilation properly. It can also run into code and manufacturer requirements. Our guide to metal roof over shingles explains the trade-offs in detail.

Choosing Your Metal Roof

Standing seam

Concealed clips and no exposed screws. The long-term choice for homes you plan to keep for decades.

Galvalume

Bare for the classic silver Hill Country ranch look, or painted for lasting color.

Stone-coated steel

Steel panels with the look of shake, tile, slate or shingles, a good fit for HOAs that want a traditional look.

Exposed fastener

Corrugated and R-panel roofing, most common on barns, shops and outbuildings.

Colors matter for heat and for HOA approval. Browse metal roof colors, and if you're worried about rain noise, read are metal roofs loud?

Converting After Hail Damage

Many Austin homeowners decide to convert after a hailstorm ruins their shingle roof. If your insurer is paying to replace a damaged shingle roof, it typically pays for what you had, and you pay the difference to upgrade to metal. Texas insurers give premium credits for impact-resistant roofing, with the amount set by each company, so ask your agent what a Class 4 metal or stone-coated steel roof would save you. See metal roofs and hail for more.

Shingle to Metal Conversion FAQs

Can my shingle roof be converted to metal?

Most can. We tear the shingles off to the deck, repair the decking, install high-temperature underlayment, rebuild every flashing in metal and correct the ventilation before the panels go on.

Do you install metal over shingles?

On our conversions we tear off to the deck. Leaving shingles in place hides decking problems and makes it hard to fix flashing and ventilation properly.

Do I need HOA approval to switch to metal?

If you're in an HOA, almost certainly. Get approval of the panel profile and color before panels are ordered. Stone-coated steel is often the easiest metal option for HOAs that want a traditional look.

Will a metal roof make my house louder?

Over a solid deck with underlayment and an insulated attic, most homeowners don't notice much difference in rain noise.

Can I upgrade to metal through a hail insurance claim?

Usually insurance pays to replace what you had, and you pay the difference for the upgrade to metal. Ask your agent about premium credits for impact-resistant roofing.

How do I compare metal roof quotes?

Ask for a line-item scope listing the panel system, gauge, finish, underlayment, tear-off, decking, trim and flashing. Two quotes are only comparable when they list the same work.

Ready to Leave Shingles Behind?

Request an estimate and get a line-item scope for converting your roof to metal.